2023-2024 New Year's Day Holiday Notification

LNG Cylinder Weld Grinding Machine Successfully Shipped to Changchun

December 15, Changchun customers previously ordered Anhui Xin Yida independent research and development of LNG gas cylinder welding seam polishing equipment (LNG gas cylinder welding seam polishing equipment) after strict installation, commissioning, inspection has been successfully loaded to Changchun. Anhui Xin Yida for the domestic polishing equipment in the gas cylinder through the application of polishing process to add new members!

How belt grinding works？

When the abrasive belt is running normally, we can adjust it through the tensioner contact wheel. According to the width of the abrasive belt, we can choose to position the abrasive belt automatically or manually. The automatic guide device is usually used when the abrasive belt width is greater than 200mm, and it can automatically align the abrasive belt between the tensioner contact wheels.

Polishing machine safety operating procedures

1. Before use, check whether the wires, plugs, and sockets are insulated and intact. 2. Use the grinder correctly and check whether the grinding block is damaged or loose. 3. It is strictly forbidden to use oily or wet hands when working with the grinder to avoid electric shock. 4. It is strictly forbidden to use in fireproof areas. If necessary, it must be approved by the security department.

Floor polishing machine operation

1. The polishing machine is used to wax and polish the marble floor. To make the floor brighter, a polishing machine with a speed of more than 1000 rpm is required. Use liquid high-speed polishing wax. 2. Check whether the machine body is normal and whether the wax pot nozzle is blocked. 3. Clean the floor to be polished at high speed. 4. Install the white high-speed polishing pad.